It’s Safety Tip Tuesday! OSHA requires that fall protection equipment—such as harnesses, lanyards, and anchor points be inspected at least annually by a competent person to ensure it remains in safe working condition. This regulation, found in OSHA standard 1910.140(c)(18) and 1926.502(d)(21), is critical for identifying wear, damage, or defects that could lead to catastrophic […]
Read More… from Safety Tip Tuesday: Fall Protection Equipment Inspection
It’s Safety Tip Tuesday! The Kentucky Derby isn’t just a race, it’s the result of months of preparation, discipline, and flawless execution. Every trainer, jockey, and horse knows that success on Derby Day depends on the work put in long before they reach the starting gate. Workplace safety is no different. It’s not about luck; […]
Read More… from Safety Isn’t a Sprint: Building a Winning Foundation, One Step at a Time
It’s Safety Tip Tuesday! Monthly Safety(toolbox) Talks are a vital part of maintaining a strong safety culture on commercial job sites. These focused discussions reinforce critical safety protocols, address recent incidents or near-misses, and provide an opportunity for workers to ask questions and share concerns. By keeping safety top of mind, these regular talks help […]
Read More… from Safety Tip Tuesday: Monthly Safety (Toolbox)
It’s Safety Tip Tuesday! Musculoskeletal disorders (MSDs) related to poor ergonomics are a growing concern in many work environments, affecting productivity, employee well-being, and long-term health. These disorders—such as carpal tunnel syndrome, tendonitis, and chronic back or neck pain—often develop from repetitive motions, awkward postures, or prolonged sitting without proper support. Inadequate workstation design and […]
Read More… from Don’t Let Poor Posture Be a Pain: Ergonomic Tips for a Safer Workplace
It’s Safety Tip Tuesday! Are your employees trained properly according to OSHA? When using Self-Retracting Lifelines (SRLs) on commercial jobsites, OSHA requires that they meet the criteria outlined in 29 CFR 1926.502, which governs fall protection systems. SRLs must be part of a comprehensive fall protection plan and be anchored to a secure point capable […]
Read More… from Safety Tip Tuesday: OSHA’s Requirements for Self-Retracting Lifelines
It’s Safety Tip Tuesday! When storing compressed gas cylinders on a commercial jobsite, OSHA has strict requirements to ensure safety and prevent hazardous incidents. According to OSHA standard 29 CFR 1926.350, cylinders must be stored upright and secured to prevent tipping, falling, or rolling. They should be kept away from heat sources, electrical circuits, and […]
Read More… from Safety Tip Tuesday: Storing Compressed Gas Cylinders
It’s Safety Tip Tuesday! When working at heights, having secure anchor points is a critical component of fall protection systems, as mandated by OSHA. According to OSHA 29 CFR 1926.502(d)(15), anchor points must be capable of supporting at least 5,000 pounds per employee attached or must be designed, installed, and used under the supervision of […]
It’s Safety Tip Tuesday! Do you know the top 10 OSHA violations Bailey Safety sees on job sites? Well, here they are: 1) Worksite reasonably organized/good housekeeping 1926.25(a)2) Fire extinguishers inspected periodically 1926.150(c)(1)(viii)3) Flexible cords maintained in good condition 1926.416(e)(1)4) Suitable fall protection provided/used (working 6+ ft) 1926.501(b)(1)5) Guardrails installed, maintained and compliant 1926.502(b)6) Floor […]
Read More… from Safety Tip Tuesday: Top 10 OSHA Violations Seen on Job Sites
It’s Safety Tip Tuesday! Do you have a rescue plan? Having a well-defined rescue plan for a worker who has fallen while wearing a harness is critical on job sites, as it can mean the difference between life and death. While fall arrest systems prevent workers from hitting the ground, they can also leave them […]
It’s Safety Tip Tuesday! A thorough Job Site Hazard Analysis (JHA) is a critical first step before any construction project begins, ensuring a safer work environment for all involved. By systematically identifying potential hazards—such as fall risks, electrical dangers, and equipment malfunctions—contractors can implement proactive safety measures to prevent accidents, injuries, and costly delays. A […]
Read More… from Safety Tip Tuesday: Job Site Hazard Analysis